1.2
S
ETUP
Read the Operation Manual before setting up the Life Fitness Cross-Trainer.
W
HERE TO
P
LACE THE
L
IFE
F
ITNESS
C
ROSS
-T
RAINER
Following all safety instructions in Section 1.1, move the Life Fitness Cross-Trainer to the location in which it will be
used. See Section 7, titled
Specifications,
for the dimensions of the footprint. Allow one foot of clearance in front of the
Life Fitness Cross-Trainer to allow for movement of the pedal levers. It should be easy to mount the Life Fitness Cross-
Trainer from the side.
H
OW TO
S
TABILIZE THE
L
IFE
F
ITNESS
C
ROSS
-T
RAINER
After placing the Life Fitness Cross-Trainer in position, check the unit’s stability by attempting to rock it. Any slight rock-
ing indicates that the unit must be leveled. Check the front stabilizing feet to determine which foot does not rest fully on
the floor. Rotate the foot counter-clockwise to lower it. Recheck the stability and adjust again as needed until the Life
Fitness Cross-Trainer is stable and no longer rocks.
Lock the adjustment into position by tightening the jam nut
against the stabilizer bar with an open end 17mm wrench.
C
HECK FOR
P
OWER
The console is powered by a rechargeable 6-volt battery. Check the battery by pressing the START key. The console should
light up, and the MESSAGE CENTER should display a prompt to set up a workout. If this does not occur, mount the Life
Fitness Cross-Trainer and begin pedaling. The console should then light up, making it possible to program a workout. Pedal
for 10 to 20 minutes at 1.5 mph (2.4 kph) or faster during a workout to charge the battery. Afterwards, the pedal action during
workouts keeps the battery charged. If the console still does not light, contact Life Fitness Customer Service. See Section
6.5, titled
How to Obtain Product Service
, for more information.
F
ITNESS AND
E
NTERTAINMENT
N
ETWORKING
Two interchangeable network ports allow the Life Fitness Cross-Trainer to be connected to a fitness entertainment sys-
tem and/or a network, such as FitLinxx
TM
interactive fitness network.
•
Fitness network:
The network connection enables the console to upload user workout statistics to a fitness net-
work database or to download remotely stored information, such a pre-set workout program. See Section 4.2,
titled
Using the Workouts
, for information on logging onto a network.
•
Entertainment:
The network connection enables the console to power a third-party receiver for use with a ser-
vice such as the Cardio Theater
®
entertainment system or the BroadcastVision
TM
entertainment system.
These ports are located on the back of the console and are enclosed by a removable cover. Any use of the ports for other
than their intended purpose could void the product warranty.
7
