11
F
ITNESS
N
ETWORKING
One type RJ45 networking port (A) allows the Life Fitness
Stairclimber to be connected to a fitness network, such as the
FitLinxx
TM
interactive fitness network.
The network connection enables the console to upload user
workout statistics to a fitness network database or to download
remotely stored information, such a pre-set workout program.
See Section 4.2, titled Using the Workouts, for information on
logging onto a network.
The network port is located on the back of the console. Any use
of the port for other than its intended purpose could void the
product warranty.
C
ABLE
TV H
OOK
-U
P
Note to the CATV Installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that pro-
vides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected
to the grounding system of the building as close to the point of cable entry as practical.
Antenna Grounding According to the NEC
Antenna Grounding According to the National Electrical Code, ANSI/NFPA 70.
1. Antenna lead in wire
2. Antenna discharge unit (nec section 810-20)
3. Grounding conductors (nec section 810-21)
4. Ground clamp
5. Power service grounding electrode system
(nec article 250, part h)
6. Ground clamp
7. Electric service equipment
NOTE:
The TV aspect of the LCD Console can only receive a analog signal. Digital cable must be external-
ly converted to an analog signal. A 75-ohm external antenna terminal for VHF/UHF (>43dBuV (@75ohm) or
> 65.8dBm) TV signal input must be present before TV setup can occur.
Life Fitness is not responsible for the installation of CATV service or components required for the delivery of
CATV service.
