background image

16 

 

Lifa Air Oy Ltd. 

• Vellamonkatu 30 B, 00550 Helsinki, Finland • Tel: +358 9 394 858 

 

Warranty

 

 
The warranty is for one (1) year from the date of purchase and is valid per the general conditions of 
delivery, provided that these instructions have been carefully followed. Warranty also expires if any 
other than Lifa accessories (brushes, filters etc.) has been used. 
 
Service and repair are free of charge within the warranty period (proof of purchase / receipt must be 
presented) under the following conditions: 

 

The defect is caused due to defects in materials or defective components. 

 

Defects due to normal wear and tear, misuse or insufficient maintenance are NOT covered 
by the warranty. 

 

The machine has been delivered to the first compulsory maintenance check within 6 months 
and/or 100 hours of use 

 

Any maintenance and repairs must be carried out by the manufacturer or by an authorized 
representative  of  the  manufacturer.  Manufacturer  does  not  accept  responsibility  for 
maintenance carried out by a third party. 

 

A written reclamation form must be filled out and sent with descriptive photos 

The appliance shall be delivered to the authorized Lifa Air representative from whom the buyer has 
bought the machine from OR when agreed mutually in writing beforehand to the factory postage paid 
to: 

Oy Lifa Air Ltd 
Vellamonkatu 30B 
FI-00550 Helsinki, Finland 
Tel. +358 9 3948 58 
www.lifa.net 

 

Oy Lifa Air Ltd reserves the right to introduce changes without a further notice. 

 

Recycling 

 
The machine can always be returned to the Lifa Air authorized representative from which the buyer 
has bought the machine from, or to the address above postage paid in case there is no recycling 
facility where the owner lives.  
 
Metal parts (frame, reel, motor) can be recycled as metal scrap.  
 
Electrical  parts  (frequency  converter,  main  switch)  should  be  returned  to  an  authorized  recycling 
depot. Other parts can be recycled as mixed normal waste.  

 

Summary of Contents for LIFA Duct Control Cleaning Robot


















Reviews: