3
Lifa Air Oy Ltd.
• Vellamonkatu 30 B, 00550 Helsinki, Finland • Tel: +358 9 394 858
General directions
Lifa Duct Control Cleaning Robot, electrically driven cleaning robot with inspection camera equipment
and compressed air operated cleaning machine. In order to rotate brush a separate compressor is
needed. It is also possible to spray liquids or air-jet simultaneously while brushing (separate feeding
hose needed). It is constructed for inspecting and cleaning of different kind of ducts, circular and
rectangular, pipes and crawl spaces in dry conditions.
The unit is NOT water resistant; it cannot be used in wet conditions, like sewage pipes!
It is forbidden to use the equipment for any other purpose without permission from the manufacturer.
If the equipment is used for a purpose other than that for which it is designed, the manufacturer is
not responsible for the possible consequences.
The equipment may only be used by personnel who have been trained in its use and who have read
the operating and other instructions supplied by the manufacturer.
The persons responsible for operating the machines or equipment must acquaint themselves with
their structure, functions and safe use.
No safety functions may be removed or disabled while the machine is being used.
If the machine has to be installed in a way that stops or impairs the functioning of its original safety
functions, the personnel in charge must be notified of this immediately.
The equipment covered by these instructions has been manufactured according to the current laws,
statutes and bylaws of European Union. Viewpoints and regulations on the safe use of machines
change over time. If the person using the Lifa’s equipment notices any reasons or possibilities for
improving work safety, Lifa Air Ltd. would be most grateful to receive such information.
IMPORTANT!
Always save the inspection report given with the machine: this is the proof of
purchase for you and helps to order the right spare parts for your unit (some
components may change over time). Also, the CE-marking plates in robot may fade
over time and use, so necessary information is found from your office records also.
