![background image](http://html1.mh-extra.com/html/lievers/hal200li/hal200li_user-manual_1907654022.webp)
22/79 Gebruikershandleiding / User Manual / Bedienungsanleitung
HAL200Li,
rev. 1.0: 09-02-20223
3. Technical specifications
3.1 Technical details
Hal200Li finishing screed
Length
232 millimeter + handle 1631 millimeter
Width
2000 millimeter
Height
385 mill handle 1631 millimeter
Mass (including battery)
18 kg
Hal200Li motor
Power
250W averaged / 450W maximum.
Revolutions
20.000 r/min spindle maximum
7.000 vib./min vibrating element maximum
Voltage
18 V DC
Figure 3: Measurements in mm of the Hal200Li finishing screed
Ingress Protection
IP53, Spray proof insulation
Motor protection
Impact and shockproof plastic motor housing.
Sound pressure level
76 db(A) (outside, 1 metre distance, ear height).
According to the EC Machinery Directive, required indication of noise
emission is for the sound pressure level measured at 1 meter distance
(L pA=db(A). This sound value was determined according to ISO 6081 for
sound pressure level (LpA).
Acceleration
5,7 m/s² @ maximum rpm (max 1 hour and 30 min. working)
3,6 m/s² @ average rpm in praxis (max 3 hours and 50 min. working)
Weighted effective value of acceleration determined according to ISO 5349
part 1: higher than 2,5m/s² *. These data were measured during operation
of the inside vibrating element in concrete.
* Obligated
According to ISO 5349, whenever wearing vibrating reducing gloves, a
user can continuously work for 3 hours (comfort value) to a max. of 11.7
hours per day safely.