20/79 Gebruikershandleiding / User Manual / Bedienungsanleitung
HAL200Li,
rev. 1.0: 09-02-20223
1. Preface
This manual has been written to help you operate and maintain the Hal200Li finishing screed safely. This
manual is intended for dealers and operators of the Hal200Li finishing screed and contains useful
instructions for use, maintenance and repair. These instructions need to be respected and followed.
Warranty provisions
All damage to parts of the Hal200Li finishing screed, occurring within 12 months after date of purchase
as a consequence of material, production or construction defects, will be replaced by the manufacturer
as soon as possible.
The warranty is valid for 12 months from the date of purchase except for wear parts like, cables, plug,
switches.
The manufacturer declines all responsibility for unsafe situations, accidents and damage caused by:
▪
Ignoring safety and using instructions as described on the machine or the instruction manual.
▪
Incompetent or incorrect maintenance (f.i. irregular cleaning of the ventilation slots and cleaning
with a high pressure cleaner or by a water jet under high pressure
▪
Storing the machine in a damp place.
▪
Assembling or dismantling of the Hal200Li finishing screed by unqualified personnel (employees
who are unfamiliar with the content of this instruction manual).
▪
Other use than the prescribed use.
▪
Modifications of the machine carried out by other than manufacturer. This also includes
assembling of non-original parts.
▪
Improper use. (All use that is not covered by chapter 5 is considered improper use by the
manufacturer.)
(Furthermore, the General Terms and Conditions of Delivery and Payment of the Metaalunie are
applicable)
Warranty certificate
HAL200LI no.: _______________________________
Date of purchase: ___________________________________
Figure 1: example label
Hal200Li finishing screed
The label can be found on the backside of the drive unit.