58 Chapter 8 Options
Liebert
®
ITA 10kVA UPS User Manual
Name
Model
Description
Appearance
RS485 card
UF-RS485
Be used to connect the UPS to RDU-A controller, or
connect to the cascade-communication in parallel
system
MODBUS card
UF-MODBUS210
Be selected when the UPS is connected to the
controller system of the building
Dry contact card
UF-DRY310
Provide 4 routes of relay signal outputs and 3 routes
of digital signal inputs
Extended dry contact
card
UF-DRY320
Provide 4 routes of relay signal outputs, 3 routes of
digital signal inputs;
Provide also RS232 and RS485 communication
functions, and 4 routes of analog signal acquisition
function
RS232 card
UF-RS232
Only support RS232 protocol commmunication, and
the maximum cable length of the communication
cable should not exceed 15m
Remote monitorng
software
SiteMonitor
SiteMonitor PC license monitoring software (used for single and parallel UPS,
monitors on site, a CD delivered with the UPS, and a network shutdown program
for the server is provided in it)
SiteMonitor network license monitoring software (number of user
≤ 5)
SiteMonitor network license monitoring software (number of user
≤ 20)
SiteMonitor network license monitoring software (limitless)
8.7 10A Charger
The 10A charger is an option for the long back-up UPS, and its description is given in Table 8-9.
Table 8-9 Description of 10A charger module
Model
Name
Description
Dimension
(width × height × depth, mm)
Weight
UF-BCH192/10
10A charger
Charge for battery with large capacity, and
used together with Liebert
®
ITA 5kVA, 6kVA,
10kVA UPS to shorten the charging time
435 × 85 × 380
12kg
The appearance of the 10A charger is shown in Figure 8-15.
Display panel
Ventilation hole
Figure 8-15 Appearance of 10A charger
The rear panel of the 10A charger is shown in Figure 8-16.
