background image

 

13

 

 
 

1050 Dearborn Drive    Columbus, OH 43229    614-888-0246 

 

Technical Support 

 
 

U.S.A................................................................ 1-800-222-5877 
Outside the U.S.A ........................................... 614-841-6755 
U.K................................................................ +44 (0) 1793 553355 
France ...........................................................+33 1 4 87 51 52 
Germany ...................................................... +49 89 99 19 220 
Italy .............................................................. +39 2 98250 1 
Netherlands.................................................. +00 31 475 503333 
Internet.......................................................... [email protected] 
Web site ....................................................…

 

http://www.liebert.com 

Worldwide FAX tech support......................…614-841-5471 

 
 
 
 

While every precaution has been taken to ensure 
accuracy and completeness in this manual, Liebert 
Corporation assumes no responsibility, and 
disclaims all liability for damages resulting from 
use of this information or for any errors or 
omissions.  

 

©1996 Liebert Corporation All rights reserved 
throughout the world. Specifications subject to 
change without notice.  

 

® Liebert and the Liebert logo are registered 
trademarks of Liebert Corporation. All names 
referred to are trademarks or registered 
trademarks of their respective owners.  

 

Printed in U.S.A.  
SL-23235 (11/97) Rev. 3.0 

 

R

Summary of Contents for PowerSure PS250-60S














Reviews: