17
US-EN
neighborhood, the transmitter and the receiver have to be synchronized
via encryption. Every transmitter functions with a different signal en-
cryption.
Synchronize the transmitter and receiver as follows:
As soon as the batteries are installed, the receiver enters synchro-
nizing mode for 1 minute. During synchronizing mode, the signal
indicator
1
steadily lights up blue.
You can also manually enter synchronizing mode by holding the
synchronizing button
5
for 3 seconds.
The signal indicator
1
on the receiver will steadily light up for
1 minute, to indicate that the receiver is in synchronizing mode.
Press the chime button
9
of the transmitter, while the receiver is
in synchronize mode. If the receiver receives the signal, the steady
blue light of the signal indicator
1
flickers 6 times to indicate
that the synchronization is successful.
Setting the signal type
The receiver can indicate the reception of a door signal either both
optically and acoustically, or only acoustically, or only optically.
Using the signal type selector button
3
, select whether the signal
is to be indicated both optically and acoustically or acoustically
or optically.
Press the signal type selector button
3
once. An acoustic signal
will sound and afterward the signal indicator
1
will flash. The re-
ceiver will now indicate the door signal acoustically and optically.
320257_silv_Design-Funktuerklingel_content_US.indd 17
01.03.19 12:13
