INT-66HDX
Installation Guide
6
The Intelix INT-66HDX is a six input by six output HDBaseT/HDMI matrix switcher with HDCP 2.2 and 4K/30 video
support. The matrix features advanced EDID and HDCP handling, including the ability to turn input HDCP compliance
ON and OFF to ensure maximum functionality with a wide range of sources.
The INT-66HDX features HDBaseT twisted pair extension for each output, and simultaneous HDMI on the first
three outputs, allowing the same signal to be routed to the HDMI connector and a remote destination with an
HDBaseT receiver. The HDBaseT ports support up to 4K/30 HDMI video with audio, bidirectional wide-band IR,
matrix control via IR, RS232 tunneling, and HDCP (1.4 and 2.2) up to 100 meters (328 feet). Each HDBaseT output
port supplies power to the attached extender, eliminating the need for a power supply at the display end. Each
output features analog stereo audio de-embedding and coaxial multichannel audio de-embedding for connection
to amplifiers or DSPs.
The INT-66HDX can be controlled via front panel buttons, front panel IR, external IR, remote IR through HDBaseT
extenders, RS232, and Ethernet. The matrix includes a simple IR remote control to allow IR switching. This IR
remote control can be learned into universal remotes and IR based control systems. An IR All In port is provided,
which allow one IR connection to control all four remote displays.
The matrix also features a full command set for RS232 and Ethernet control with third party control systems, plus
control via a web browser. RS232 commands to remote displays can either be tunneled directly to the displays or
be embedded in the control stream through the matrix from both the RS232 and Ethernet control ports, which will
reduce the number of serial ports required for the control system.
Product Overview
Package Contents
Please verify the following items are in the shipping box prior to installation of the INT-66HDX.
INT-66HDX Matrix Switcher
Rack Ears with Screws - 2 ea
Shelf Feet with Screws - 4 ea
US Power Cable
RS232 Cable
Removable 3-pole Terminal Blocks (installed on matrix) - 12 ea
Infrared Receiver
Infrared Remote Control
AAA Batteries - 2 ea
