LIBERTY AV SOLUTIONS intelix INT-66HDX Installation And Operation Manual Download Page 12

Page: 12 / 36

INT-66HDX

Installation Guide

Connect Sources

Connect the source devices to HDMI inputs using HDMI cables that are less than or equal to 5 meters in length.

For source devices that are further away, an HDMI extension device will be required to complete the connection.

Connect Audio Outputs

L+

R+

INT-66HDX

Audio

Device

Unbalanced Audio Connection

Unbalanced Audio Wiring

Coaxial Digital Audio

Using the included removable 3-pole terminal blocks, make a cable to interface between the audio device and the

INT-66HDX as shown in the drawing above. Consult the documentation for the audio device to identify the left, left

ground, right, and right ground audio signals.

Insert the removable 3-pole terminal block to the appropriate output zone terminal.

Connect a high quality 75 ohm coaxial digital audio cable between the audio device and the appropriate output

zone port on the INT-66HDX.

Connect Displays

HDMI Outputs

HDBaseT Outputs

Connect the display devices to HDMI outputs using HDMI cables that are less than or equal to 5 meters in length.

For display devices that are further away, it is highly recommended to utilize the HDBaseT outputs.

Connect the HDBaseT receiver to the display per the manufacturer’s instructions. Connect the HDBaseT cable to

the matrix and the HDBaseT receiver.

Summary of Contents for intelix INT-66HDX





































Search results

Summary of Contents for intelix INT-66HDX

Reviews:

Related manuals for intelix INT-66HDX

Brands by name

Popular brands

LIBERTY AV SOLUTIONS intelix INT-66HDX, Installation And Operation Manual

Search results

Summary of Contents for intelix INT-66HDX

Reviews:

Related manuals for intelix INT-66HDX

Brands by name

Popular brands