LIBERTY AV SOLUTIONS intelix INT-66HDX Installation And Operation Manual Download Page 34

Page: 34 / 36

INT-66HDX

Installation Guide

Technical Specifications

Input/Output Connections

HDMI Inputs

Six (6) HDMI Type A Receptacle

IR Outputs

Six (6) 3.5mm TRS

HDMI Outputs (Outputs 1, 2 and 3 only)

Three (3) HDMI Type A Receptacle

HDBaseT Outputs

Six (6) 8P8C Port (Shielded RJ45 Female)

Analog Audio Outputs

Six (6) 3-Pole/3.5mm Euroblock

RS232 Tunnel

Six (6) 3-Pole/3.5mm Euroblock

IR All In

One (1) 3.5mm TRS

IR Eye

One (1) 3.5mm TRS

TCP/IP

One (1) 8P8C Port (Shielded RJ45 Female)

RS232

One (1) DE9 Port Female

Power

One (1) IEC C14

Supported Audio, Video, and Embedded Control

Video Resolutions

SMPTE: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, UHD/30 (HDMI only)

Color Depth: 24, 30, 36, 48bit

Maximum Video Compatibility at 100 m

Deep Color 48 Bit at 1080p and 3D, UHD/30

Maximum Passive HDMI Cable Distance

5 m (16.4 ft)

Video Compliance

HDMI 1.4, HDCP 1.4 and HDCP 2.2

Embedded Audio

Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio

Analog Audio Pinout

Left, Ground, Right

Embedded RS232 Baud Rate

2400, 4800, 9600, 19200, 38400, and 115200 baud

IR Carrier Frequency Range

33-55kHz at 5 volts

HDBaseT Signal Characteristics

Maximum Distance

100 m (328ft)

Cable Requirements

Continuous solid core Category 5e or greater with TIA/EIA-568B crimp pattern (no couplers in-line)

Bandwidth

10.2 Gbps

HDBaseT Chipset

VS100TX

Device Control Parameters

IR Carrier Frequency Range

33-55kHz at 5 volts

Ethernet

100BaseT

RS232 Baud Rate

9600 baud

Chassis and Environmental

Enclosure

Painted Aluminum

Dimensions (H x W x D)

88 mm x 437 mm x 380 mm (3.46 in x 17.20 in x 14.96 in) – 2 RU

Shipping Weight

7.25 kg (16 lbs.)

Operating Temperature

0° to +48° C (+32° to +120° F)

Operating Humidity

10% to 90%, Non-condensing

Storage Temperature

-20° to +70° C (+14° to +158° F)

Storage Humidity

10% to 85%, Non-condensing

Power, ESD, and Regulatory

Power Supply

100V-240VAC / 50-60 Hz

Power over Ethernet (PoE) Compatibility

802.3af Alternative A, 15 watts per port, 48V available at remote device

Power Consumption

105 watts (max)

ESD Protection

15kV air, 8kV contact

Product Regulatory

UL, FCC, CE, RoHS

Other

Standard Warranty

2 years

Diagnostic Indicators

Power LED, System LCD

Included Accessories

Installation Guide, IR Remote with AAA Batteries, IR Eye, Rack Mounting Ears with Screws, Chassis

Feet with Screws, US Power Cable, Straight-Through DE9 Male to Female RS232 Cable, Twelve (12)

3-pole Removable Terminal Blocks

Compatible Receivers (AV and Power)

DIGI-HD60-R (70m)

Compatible Receivers (AV, Control, and Power)

DIGI-HD60C-R (70m), DIGI-HDX-R (100m), INT-HD70-RX (70m), INT-HDX100-RX (100m)

Compatible Receivers (AV and Control)

DIGI-BSR-4K (100m)

Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable

patches.

Summary of Contents for intelix INT-66HDX





































Search results

Summary of Contents for intelix INT-66HDX

Reviews:

Related manuals for intelix INT-66HDX

Brands by name

Popular brands

LIBERTY AV SOLUTIONS intelix INT-66HDX, Installation And Operation Manual

Search results

Summary of Contents for intelix INT-66HDX

Reviews:

Related manuals for intelix INT-66HDX

Brands by name

Popular brands