INT-66HDX
Installation Guide
23
Advanced Front Panel and IR Remote Operation
EDID Management
To copy the EDID from output 3 to input 1:
1.
Press EDID.
2. Press input 1.
3. Press output 3.
4.
Press ENTER.
To copy the EDID from output 3 to all inputs:
1.
Press EDID.
2.
Press ALL.
3. Press output 3.
4.
Press ENTER.
The INT-66HDX has five built-in EDID settings for the inputs, but also allows copying the EDID information of an
output device to the input of the matrix.
Copy EDID from Output to Input
To enable one of the built-in presets:
1.
Press and hold EDID for 3 seconds.
2. Press the input number to change.
3.
Press the output number that matches the built-in EDID table to use on the input.
4.
Press ENTER to confirm the changes.
There are six types of built-in EDID data. The chart below illustrates the settings of the built-in EDID data.
Copy EDID from Output to Input
No.
EDID Data
1
1080P 2D 2CH (default)
2
1080P 3D 2CH
3
1080P 2D Multichannel
4
1080P 3D Multichannel
5
3840x2160 (UHD) at 30Hz 2CH
6
4096x2160 (4K) at 30Hz 2CH
