12
QUICK GUIDE / DL-USB-PTZ20-W
Standby Key
The camera enters standby mode if there's a long-press for 3 second on the
standby key.
Long - press for 3 seconds again on the standby key. The camera will self-
check again and return to HOME position. (If preset 0 position is set, the
camera will return to preset 0 position).
In this manual, “press the key” means a click rather than a long-press,
and a special note will be given if a long-press for more than one second
is required.
When a key-combination is required, do it in sequence. For example,
“
[*]+[#]+[F1]
” means press “
[*]
” first and then press “
[#]
” and last press “
[F1].
”
Match Code for Wireless Remote Control
One to One Code Matching: Press the "set" and "*" keys combined for
3 seconds until the LED indicator starts flashing. Camera will receive the
signal and power on. The LED indicator will go off if the code matches
successfully. The camera can be controlled by this wireless remote control
only after one to one code pairing. Otherwise, please clear the code
matching of this remote control, or use other remote control to pair with
the camera again.
If one to one code matching fails, the red LED light flashes for 20 seconds
and then goes off. The camera will stop code match and turn on sleep
mode. Press any key to wake up the camera and re-match code.
Note: After code matching successfully, please select the camera address to
control it.
Clear Code: Press the "set" and "*" keys combined for 3 seconds until
the LED indicator starts flashing. Camera will power off and on. The LED
indicator will go off if the code clears successfully.
Sleep Mode and Wake Up: Press any key to wake up the camera from
sleep mode.
Camera Selection
Select the camera address you want to control.
USING THE REMOTE CONTROL
