DL-HD2A-RX Owners Manual
8
VGA Video Input (Transmitter only)
USB Host (Transmitter only)
USB Client
Connect a VGA source device to the VGA input using a VGA cables that are less than or equal to 8 meters
in length. For source devices that are further away, a VGA extension device will be required to complete the
connection.
Connect a USB host device to the USB A input using a USB A to A cable that is less than or equal to 5 meters in
length.
Connect a USB client devices to any of the USB A ports on the DL-HD2A-RX receiver using a USB cable that is
less than or equal to 5 meters in length.
Connect an HDMI source device to the HDMI input using HDMI cables that are less than or equal to 5 meters in
length. For source devices that are further away, an extension device will be required to complete the connection.
Connecting A/V Sources
Connecting USB Peripherals
HDMI Input (Transmitter only)
Connecting a Display
HDMI Output
Connect the display devices to HDMI output on the receiver using an HDMI cable that is less than or equal to
5 meters in length. For display devices that are further away, it is highly recommended to utilize the HDBaseT
output.
Audio Input (Transmitter only)
Audio Output
Note
:
The DL-HD2A-RX audio output labeled
PASS THROUGH
only passes 2 channel audio from the
dedicated
AUDIO IN
port on a compatible Digitalinx HDBaseT 2.0 transmitter wall plate, the audio
output labeled
DE-EMBED
de-embeds 2 channel audio from the embedded HDMI stream connected
to the HDBaseT transmitter.
Connecting Audio
Connect an audio source to the transmitters audio input using a 3.5mm audio cable. The DL-1H1V1U-WP-W
supports a 3.5mm stereo unbalanced input
Connect an audio amplifier to the receivers audio output using a 3.5mm audio cable. The DL-HD2A-RX
supports a 3.5mm stereo unbalanced output
