DL-HD2A-RX Owners Manual
11
Downloading RS232 Port Configuration Software
Overview
Making a PC Connection
The
Digitalinx RS232 Automation Configuration Software
can be found online on the
DL-HD2A-RX
product
page under the SOFTWARE tab at
www.libav.com
. Download the zip file and extract all files, then run
the tool on a Windows PC that will be used to configure the
DL-HD2A-RX
.
The Digitalinx RS232 Automation Configuration Software allows you to load ON and OFF serial commands into
the RS232 control port of the DL-HD2A-RX so the commands can be sent to a connected display or projector
to automate power when a video signal is introduced to the system and when the transmitter is in an off state.
When programming ON/OFF commands using this software tool, it will also program the DISPLAY on/off button
operation of the connected HDBaseT 2.0 transmitter as well.
To connect a PC to the DL-HD2A-RX RS232 port, a DB9 (RS232) to USB adapter is required. A USB serial
cable is included with the DL-HD2A-RX
Once the RS232 to USB adapter has been installed on the PC, connect the USB adapter to a DB9 female
connector that is terminated to a 3 pin phoenix connector.
RS232 Port / CEC Configuration Software Usage
