LI-COR LI-7820, Instruction Manual

Page: 21 / 92

Connecting over wireless
Follow these steps to connect to the instrument's wireless network
1
.
1 Connect your PC or mobile device to the instrument wireless network
When Wi-Fi is enabled the LI-7820 will make a local wireless network, indicated by
the presence of a wireless network symbol (
) on the display. Find the network in
the list of networks presented on your device. The network name is the hostname (and
serial number) of the instrument . The password is
licorenv
.
2 Enter the hostname or IP address in a web browser address bar
One or more of the following will work:
l
Hostname: Enter
tg20-nnnnn.local
where
tg20-nnnnn
is the hostname (and
the serial number) of the instrument.
l
Dynamic IP address on the display panel if the network cable is connected.
l
Fixed IP address of
192.168.10.1
if the internal Wi-Fi is enabled.
3
Press
Enter
to connect.
If you are unable to connect, see troubleshooting Connection problems on page 5-1.
1
This product is capable of creating a Wireless Local Area Network (WLAN). The use of WLAN is restric-
ted in some regions and countries. The illegal use of WLAN may be punishable under these regulations.
Check your local regulations to determine if WLAN is permitted. LI-COR, Inc. cannot be held liable for
any problems arising from the use of WLAN in any countries or regions. Legal penalties may result from
any of the following: enabling Wi-Fi where it is not permitted, modifying or altering the product, or
removing the certification labels from the product. To disable the Wi-Fi, see
Enabling and disabling Wi-Fi
on page 2-7.
Section 2. Getting started
2-5 Connecting over wireless