O
PERATION
LH ”I
NTELLITRAM
” 500 O
PERATORS MANUAL
10
LH A
GRO
OPERATION
Pressing the MENU key, regardless of where you are in the program, shows the
operating screen. The operating screen is always displayed when the computer is
switched on.
Correct operation presupposes that all encodements/calibrations have taken
place (see page 13).
OPERATING SCREEN
The operating screen can be split up into the following sections. A description of
the sections follows:
Indication of the
tramlining rhythm.
The actual bout number
is marked with a black
triangle.
Active hold function
(pause in the tramlining
rhythm)
Operation function 1
(selectable)
Implement sensor
status
(area count
on/off).
Operation function 2
(selectable)
Manual control of the
tramlining rhythm.
0.00
0
01 03
02
Manual control of the
tramlining rhythm.
INDICATION OF THE TRAMLINING RHYTHM
An indication of the present bout number in the tramlining rhythm. The present
bout number is shown with a black triangle. If tramlines are being made lines are
shown on the screen indicating this (these indicate which output is activated).
HOLD FUNCTION
If the hold function is active (manual pause in the tramlining rhythm) a lock is
shown on the display. The lock is not shown when the hold function is not active.
IMPLEMENT SENSOR STATUS
When the raised lift arm is displayed on the screen the implement sensor is active
and area is
not
counted. If the lift arm is not displayed on the screen the
implement sensor is not active and area is counted.
OPERATION FUNCTION 1 & 2
Both of these operation functions are user selectable. Pressing either the ARROW
UP or ARROW DOWN keys moves the cursor between the 2 screen sections.
Repeatedly pressing the FUNCTION SELECTION key pages through the available
functions (see page 11).
MANUAL CONTROL OF THE PRESENT BOUT NUMBER
When PROGRAM key 1 (to the left) is pressed the present bout number will
decrease by 1. When PROGRAM key 2 (to the right) is pressed the present bout
number will increase by 1.
