E
NCODE
LH
”I
NTELLITRAM
” 500 O
PERATORS MANUAL
14
LH A
GRO
CALIBRATION
GRAM/PULSE
The weight, in gram, per pulse can be encoded directly if known.
NEW CALIBRATION
The procedure for calibration is thus:
1. Move the cursor to “
New calibration
” and press the ENTER key.
2. Turn the drill shaft a suitable number of rotations (see the seed drill
instruction book), the computer counts the number of pulses. Press the
ENTER key when finished.
3. Weigh the amount released (exactly) and enter this weight. Press the
ENTER key.
4. The calculated weight per pulse is now shown on the display.
WARNINGS
Key
Description
Warning on.
Warning off.
CLUTCH LEFT/RIGHT
The clutch warning is given if tramlines are made when they should not be and
visa versa.
Encode whether the warning is active (
on
) or not active (
off
). Use the program
keys 1 & 2 to switch the warning on or off.
These warning encodements are not shown if pneumatic seed drill has been
selected under machine type in the system menu (see page 22).
