LG WWT-1710B Owner'S Manual Download Page 34

Page: 34 / 72

OPERATION-WASHER

Select a washing programme.

Change the washing programme (

Temp.

Rinse

Spin

) as necessary.

Press the

Steam

Turbo Clean

button.

Press the

Start/Pause

button.

Prepare to Dry

Setting this function allows the the dryer to operate

automatically after the washing programme.

Follow the next steps to use a special

option.

Press the

Power

button of the washer.

Select a washing programme.

Change the washing programme (

Temp.

Rinse

Spin

) if necessary.

Press the

Turbo Clean

button of the washer for

3 seconds.

Press the

Start/Pause

button of the washer.

• When the dryer is turned, the paired drying

programme and option will be displayed.

• After the load weight is sensed, the dryer

display shows the estimated remaining dry

time for about 1 minute.
While the

Prepare to Dry

is in operation, the

dryer display shows

PrE

After the washing programme is finished, load

items into the dryer and close the door.

Press the

Start/Pause

button of the dryer.

• The dryer display shows the estimated

remaining dry time.

NOTE

• the

Prepare to Dry

function will not be activated

in the following cases:
- If you don't start the dryer within 15 minutes

after the washing programme has finished

-  If the dryer is unplugged
-  If the remote control function is used
-  If the washer or dryer is shut down while

setting the

Prepare to Dry

function

• When the option is set, only the

Power

button

works and lock the door. Open the door of the

dryer after the washing programme has

finished.

Using Basic Options

You can customize the programmes by using the

following basic options:

Rinse+Spin

It allows you to rinse and spin a load separately

from a regular programme. It is helpful in

preventing fresh stains from setting in fabrics.

Press the

Power

button.

Select a washing programme.

Press and hold the

Temp.

button for 3 seconds

as necessary.
• You can change the spin speed by pressing

the

Spin

button.

Press the

Start/Pause

button.

Add Item

You can use this option in order to add or remove

clothes after the washing programme has started.

Press the

Power

button.

Select a washing programme.

Press the

Start/Pause

button.

Summary of Contents for WWT-1710B









































































Search results

Summary of Contents for WWT-1710B

Reviews:

Related manuals for WWT-1710B

Brands by name

Popular brands

LG WWT-1710B, Owner'S Manual

Search results

Summary of Contents for WWT-1710B

Reviews:

Related manuals for WWT-1710B

Brands by name

Popular brands