background image

28

MAINTENANCE

EN

CAUTION

•  If the mesh hole of the lint filter is clogged, 

foreign objects in the laundry may not be 

filtered.

•  Do not leave iron objects (such as clothes pins, 

hairpins, etc.) in the lint filter as they promote 

rust.

Push down on the release tabs on both sides of 

the filter cover and pull forward.

Open the lid and remove the lint.

Wash the filter.

Close the lid and then insert the lower part of 

the filter into the wash drum. Press the top of 

the filter until you hear a click sound.

Cleaning the Drain Pump Filter

The drain filter collects threads and small objects 

left in the laundry. Check regularly that the filter is 

clean to ensure smooth running of the appliance.

Turn on the appliance.

Press the 

Spin

 button to empty all the water 

from the drum.

Turn off the appliance and unplug it from the 

power outlet socket.

Place a towel on the floor under the drain 

pump cap.
•  Residual water may remain in the drain hose 

and the water may leak from the drain hose.

Turn the cap 

a

 on the rear of the appliance 

counter-clockwise and pull it out.

Summary of Contents for WTG9020MB









































Reviews: