background image

24

OPERATION

EN

Manual Washing

When you need a rinse and spin, spin only, rinse only or wash only cycle, these can be set manually.

NOTE

•  When you set a washing cycle manually such as rinse only, wash only or wash and rinse, the water will 

not be drained out after the wash is completed. If you wish to drain the water, select a spin only cycle 

after the wash has completed.

•  If a rinse only cycle is selected, the water supply begins after detecting the load and the cycle will start. 

However the water will still fill to the selected water level even if there is water already in the tub.

•  If you do not select or change the 

Water Level

, the water level will be set automatically.

Rinse and Spin

Spin only

Rinse only

Wash only

1

s

 or 

t

Press the 

POWER

 button.

2

l

Press the 

Rinse

 

button.

p

Press the 

Spin

 

button.

l

Press the 

Rinse

 

button.

k

Press the 

Wash

 

button.

3

Rinse and spin are 

automatically 

selected.

Press the 

Spin

 button 

to adjust spin 

strength.

Press the 

Spin

 

button until the spin 

function is cancelled.

Rinse and spin are 

automatically 

selected.

4

l

 and 

p

Press the 

Rinse

 or 

Spin

 buttons to 

adjust the number 

of rinses or spin 

strength.

l

Press the 

Rinse

 

button to adjust the 

number of rinses.

l

 and 

p

Press the 

Rinse

 and 

Spin

 buttons until the 

rinse and spin 

functions are 

cancelled.

5

u

Press the 

START/PAUSE

 button to start the cycle(s).

Summary of Contents for WTG9020MB









































Reviews: