11
INSTALLATION
EN
Accessories
* This feature is only available on some models.
a
Cold and Hot Water Inlet Hoses
b
Drain Hose*
c
Tie Strap*
Specifications
Installation Place
Requirements
Before installing the appliance, check the following
information in order to install the appliance in a
correct place.
Installation Location
• Install the appliance on a flat floor of hard
material that is strong enough to support a fully
loaded appliance. (Allowable slope under the
appliance: 1º)
• Never try to level any uneven floor by putting
pieces of wood, cardboard or similar materials
under the appliance.
• If it is impossible to avoid positioning the
appliance next to a gas cooker or coal burning
stove, an insulation (85 X 60 cm) covered with
aluminium foil on the side facing the cooker or
stove must be inserted between the two
appliances.
• Ensure that when the appliance is installed, it is
easily accessible for a service technician in the
event of a breakdown.
• Additional clearance for the wall should have
10
cm
for the rear and
2 cm
for right and left side.
Model
WTG9020V
WTG9020W
WTG9020MB
Power Supply
220 - 240 V~, 50 Hz
Dimension
(Width X Depth X Height)
632 mm X 670 mm X 1020 mm
Product Weight
Approx. 44.5 kg
Permissible Inlet Water Pressure
30 - 600 kPa
10
cm
2
cm
2
cm