37
ENGLISH
How to Handle Freezing
•
Make sure to empty the drum, pour warm water of
50–60 °C up to the rubber part inside the drum, close
the door, and wait for 1–2 hours.
50‒60 °C
CAUTION
•
When the drain hose is installed in a curved shape,
the inner hose may freeze.
•
Open the cover cap and drain tube plug used for
removal of residual water to extract water completely.
Drain tube
plug
Cover cap
NOTE
•
If water does not drain, this means the ice is not
melted completely, or lint may be trapped inside.
•
When water is removed completely from the drum,
close the drain tube plug used for removal of residual
water, choose a washing programme, and press the
Start/Pause
button.
Drain hose
Detergent drawer
NOTE
•
Check that water is coming into the detergent drawer
while rinsing, and water is draining through the drain
hose while spinning.
•
When water supply problems occur, take the following
measures.
– Turn off the tap, and thaw out the tap and both
connection areas of supply hose of the product
using a hot water cloth.
– Take out supply hose and immerse in warm water
below 50–60 °C.
Supply
hose
50‒60 °C
Summary of Contents for WD1611SMW2
