11
ENGLISH
Using Anti-Slip Sheets (Optional)
If you install the appliance on a slippery surface, it may
move because of excessive vibration. Incorrect leveling
may cause malfunction through noise and vibration. If
this occurs, install the anti-slip sheets under the leveling
feet and adjust the level.
1
Clean the floor to attach the anti-slip sheets.
•
Use a dry rag to remove and clean foreign
objects and moisture. If moisture remains, the
anti-slip sheets may slip.
2
Adjust the level after placing the appliance in the
installation area.
3
Place the adhesive side of the anti-slip sheets on
the floor.
•
It is most effective to install the anti-slip sheets
under the front legs. If it is difficult to place the
pads under the front legs, place them under the
back legs.
This side up
Adhesive side
4
Ensure the appliance is level.
•
Push or rock the top diagonal edges of
the appliance gently to make sure that the
appliance does not rock. If the appliance rocks,
level the appliance again.
NOTE
•
You can obtain anti-slip sheets from an LG Service
Centre or any Hardware store.
Wooden Floors (Suspended
Floors)
•
Wooden floors are particularly susceptible to vibration.
•
To help reduce vibration we recommend you place
rubber cups at least 15 mm thick under each foot of
the appliance, secured to at least two floor beams with
screws.
Rubber Cup
•
If possible install the appliance in one of the corners of
the room, where the floor is more stable.
•
Fit the rubber cups to reduce vibration.
NOTE
•
Proper placement and leveling of the washing machine
will ensure long, regular, and reliable operation.
•
The washing machine must be 100% horizontal and
stand firmly in position.
•
It must not ‘Seesaw’ across corners under the load.
•
The installation surface must be clean, free from floor
wax and other lubricant coatings.
•
Do not let the feet of the washing machine get wet.
Failure to do so may cause vibration or noise.
•
You can obtain rubber cups (p/no.4620ER4002B) from
the LG Service Centre.
Summary of Contents for WD1611SMW2
