LG WD(M)-12331(6)AD Owner'S Manual Download Page 24

Page: 24 / 32

ow to use washer

• If the machine encounters a fault during

operation, the associated fault will be
displayed.

“ ” : Water pressure sensing error

“ ” : Problem of overfilling water

“ ” : Door is not closed

“ ” : Water inlet trouble

“ ” : Drainage trouble

“ ” : Unbalanced load

“ ” : Water temperature trouble

“ ” : Over load in motor

“ ” : Dry heater or thermostat

trouble.

If these error letters are displayed, please
refer to the troubleshooting page29 and
follow the guide.

Display

• When child lock is selected, the

“ ” is displayed.

• When time delay is selected, it shows

the remaining time to finish the selected
program.

• When washing cycle is completed,

“ ” is displayed.

• During washing cycle, the remaining

washing time is displayed.

• Recommended program by

manufacturer.

- Cotton 95˚C :

around 2 hours and 20(17) minutes

- Cotton 60˚C :

around 1 hour and 43(40) minutes

- Synthetic :

around 1 hour and 20 minutes

- Delicate : around 52 minutes

- Wool/Silk : around 50 minutes

- Hand Wash :

around 44 minutes

- Quick 30 : around 30 minutes

- Rinse+ Spin : around 21(18) minutes

- Drain : around 1 minute

• The washing time may vary by the

amount of laundry, water pressure,
water temperature and other washing
conditions.

• If an unbalanced load is detected or if

the suds removing program operates,
the wash time may be extended.
(Max. increasing time is 45 minutes.)

1. Special function display

3. Completion of washing

4. Time left

2. Self diagnosis display

❋

( ) : WD-12331(6)AD

Summary of Contents for WD(M)-12331(6)AD

































Search results

Summary of Contents for WD(M)-12331(6)AD

Reviews:

Related manuals for WD(M)-12331(6)AD

Brands by name

Popular brands

LG WD(M)-12331(6)AD, Owner'S Manual

Search results

Summary of Contents for WD(M)-12331(6)AD

Reviews:

Related manuals for WD(M)-12331(6)AD

Brands by name

Popular brands