LG WD(M)-10160(5)F Owner'S Manual Download

Page: 21 / 28

ow to use washer

• During washing cycle, the remaining

washing time is displayed.

• Recommended program by

manufacturer.

- Cotton 95˚C : around 2 hours and

43 minutes

- Cotton 60˚C : around 2 hours and

41 minutes

- Synthetic : around 1 hour and

22 minutes

- Delicate : around 56 minutes

- Wool : around 58 minutes

- Hand Wash : around 1 hour and

11 minutes

- Quick 30 : around 30 minutes

- Rinse+ Spin : around 19 minutes

- Drain : around 1 minute

• The washing time may vary by the

amount of laundry, water pressure,
water temperature and other
washing conditions.

• If an unbalanced load is detected or

if the suds removing program
operates, the wash time may be
extended.
(Max. increasing time is 45minutes.)

• If the machine encounters a fault during

operation, the associated fault will be
displayed.

“ ” : Water pressure sensing error

“ ” : Problem of overfilling water

“ ” : Door is not closed

“ ” : Water inlet trouble

“ ” : Drainage trouble

“ ” : Unbalanced load

“ ” : Water temperature trouble

If these error letters are displayed, please
refer to the troubleshooting page24 and
follow the guide.

Display

• When child lock is selected, the

“ ” is displayed.

• If the machine encounters a fault during

operation; the associated fault will be
displayed

• When washing cycle is completed,

“ ” is displayed on the “

Multi

display

”.

1. Special function display

3. Completion of washing

4. Time left

2. Self diagnosis display

Drain

Summary of Contents for WD(M)-10160(5)F





























Search results

Summary of Contents for WD(M)-10160(5)F

Reviews:

Related manuals for WD(M)-10160(5)F

Brands by name

Popular brands

LG WD(M)-10160(5)F, Owner'S Manual

Search results

Summary of Contents for WD(M)-10160(5)F

Reviews:

Related manuals for WD(M)-10160(5)F

Brands by name

Popular brands