29
CLEANING THE SIDE BRUSH
Foreign objects/materials such as hair can easily adhere to the side brush. Remove
such materials at least once a week.
If excessive amounts of foreign materials are stuck to the brush, there is the risk of
damage to the brushes.
If the
fl
oor is rough or walls are frequently cleaned, the side brush may bend or become damaged. In this case, use the following
method to straighten the side brush.
1. The following procedure is helpful in restoring deformed
brushes.
2. Turn off the power by switching the main switch off on the
rear off the unit.
3. Place the Robot Cleaner at the end of a table to make
cleaning the side brush easier. Make sure that the Robot
Cleaner is not in danger of falling.
4. Soak the side brush in warm water.
5. Press down on the side brush for about ten seconds so that
it is completely submerged in the water.
6. Slowly wipe the side brush by sliding it through your hand.
7. Rotate the side brush and repeat steps 4-6 for each section
of the brush.
8. Use the side brush only after it has completely dried.
1. Remove the screws by using a driver and separate the Side
Brush from the main unit.
2. Remove any hair after the separation.
3. Assemble the Side Brush by replacing it onto the bottom of
the Robot Cleaner, with the 'R' and 'L' marking of the Brush
matching the counterparts on Robot Cleaner.
Side Brush management
Summary of Contents for VR6250LV
Page 40: ...MEMO ...
Page 80: ... הערות ...
