24
SMART DIAGNOSIS
If a voice message is announced after Smart Diagnosis, refer to the following table to take proper actions.
Voice message
Measures (for reference)
Starting Robot cleaner smart diagnosis. Please step away and remove
any items within 1 meter, or about 3 feet.
Clear any object within a 1 m radius around Home Station, and stay
back until the diagnosis is complete.
Robot cleaner needs to be charging in order to activate smart
diagnosis. Please dock the Robot cleaner to the home station.
Move Robot cleaner to the Home Station to recharge it.
Starting Robot cleaner smart diagnosis. Reservation has been
cancelled for smart diagnosis. Please step away and remove any items
within 1 meter, or about 3 feet.
No defect found during diagnosis.
Unable to initiate smart diagnosis due to a low battery. Please try
again after battery is charged.
Try the Smart Diagnosis again after recharging the battery.
Please check that the dust bin and
fi
lter are properly installed.
Open the Dust Bin Cover and examine the bin.
Robot cleaner will not charge due to infrared sensor error. Please try
smart diagnosis again after turning the main power switch on the back
of the Robot cleaner 'Off' then 'On' again. If the problem continues,
please contact LG Electronics customer care.
Run Smart Diagnosis again and, if the same message is announced,
contact an LG Electronics service center.
Robot cleaner will not charge due to ultrasonic sensor error.
Run Smart Diagnosis again and, if the same message is announced,
contact an LG Electronics service center.
Robot cleaner will not charge due to a problem with the cliff sensors
on bottom. Please wipe the sensors clean.
Clean the three Cliff Sensors on the bottom at the front of the unit.
Please clean the camera sensor on bottom right side.
Clean the lens of Camera Sensor on the bottom-right
Please clean the obstacle detecting sensor windows on the left and
right side of the Robot cleaner.
Clean the lens of the Obstacle Sensors on both the left and right
hand sides.
A problem has been found on the Gyro Sensor. Please try smart
diagnosis again after turning the main power switch on the back of
the Robot cleaner 'Off' then 'On' again. If the problem continues,
please contact LG Electronics customer care.
Run Smart Diagnosis again and, if the same message is announced,
contact an LG Electronics service center.
Please check for foreign material on the left wheel.
Check for foreign materials on the left wheel.
Please check for foreign material on the right wheel.
Check for foreign materials on the right wheel.
A problem has been found on the left wheel sensor. Please try smart
diagnosis again after turning the main power switch on the back of
the Robot cleaner 'Off' then 'On' again. If the problem continues,
please contact LG Electronics customer care.
Run Smart Diagnosis again and, if the same message is announced,
contact an LG Electronics service center.
A problem has been found on the right wheel sensor. Please try smart
diagnosis again after turning the main power switch on the back of
the Robot cleaner 'Off' then 'On' again. If the problem continues,
please contact LG Electronics customer care.
Run Smart Diagnosis again and, if the same message is announced,
contact an LG Electronics service center.
A problem has been found with the brush. Please check for any foreign
material.
Check for any foreign material stuck in the Brush.
A problem has been found in the suction motor. Please try smart
diagnosis again after turning the main power switch on the back of
the Robot cleaner 'Off' then 'On' again. If the problem continues,
please contact LG Electronics customer care.
Run Smart Diagnosis again and, if the same message is announced,
contact an LG Electronics service center.
A problem has been found in the acceleration sensor. Please try smart
diagnosis again after turning the main power switch on the back of
the Robot cleaner 'Off' then 'On' again. If the problem continues,
please contact LG Electronics customer care.
Run Smart Diagnosis again and, if the same message is announced,
contact an LG Electronics service center.
In order to listen to the smart diagnosis result again, please press the
charging button. To stop, please press the stop button.
If you need to repeat the diagnosis result, press the 'Home' button,
or press 'Stop/OK' button to
fi
nish the diagnosis.
Smart diagnosis mode will be turned off.
Smart Diagnosis mode will not operate with the mop plate attached.
Please try again after removing it.
Run Smart Diagnosis again after removing the Mop Plate.
Smart diagnosis has failed to complete its diagnostics. Please try
again after turning the main power switch on the back of the Robot
cleaner 'Off' then 'On' again.
Turn the main power switch OFF and then ON again to resume the
diagnosis. Do NOT touch the robot or disturb its operation until the
diagnosis is complete.
Please check if the charging terminal is damaged or dirty.
Clean the bottom of the machine and Charging Terminal on Home
Station.
Summary of Contents for VR6250LV
Page 40: ...MEMO ...
Page 80: ... הערות ...
