25
INSTALLATION MENU
ENGLISH
•
Type of Connector: D-Sub 9-Pin Male
Male connector on box, viewed
towards connector.
1
5
6
9
No.
Signal
Signal requirements
1
VCC
2
RX RS232
Standard RS232 specification
3
TX RS232
Standard RS232 specification
4
IR from TV
5
GND
Power ground
6, 8
Not connected
7
2 A
+5VDC 10%, max 100mV ripple
9
1.5 A
+12VDC 10%, max 100mV ripple
One Channel Map
-
If ‘One Channel Map’ is ‘Enable’, the TV will operate as below.
•
A. When the TV is auto-scanning, it searches both air and cable channels.
•
B. User can assign a channel number him/herself by manual scan.
•
C. In ‘Programme Edit’ window, all channels are shown in a single list regardless of input source.
•
D. Automatically scanned channels may not have the user-desired channel numbers.
-
If user change the ‘Yes/No’ value, an pop-up window will be displayed to warn that all channel
information will be deleted. The Default value is ‘Yes’.
