20
INSTALLATION MENU
ENGLISH
Input
-
Set whether it is turned on by the set input source or by the last stored input source.
Programme
-
Select start channel number if Input source’s value is TV.
A/V Setting
-
If ‘A/V Setting’ is changed from ‘Off’ to ‘On’, A/V parameters that are set before entering ‘Installation Menu’ are applied whenever turn on
power.
Aspect Ratio
-
The aspect ratio determines the default aspect ratio that the set returns to on power up.
Aux Source Setting
-
Set to On(Work) or Off(Do Not Work).
-
The Auxiliary (Input) Source Setting feature will enable or disable for each external input.
-
User cannot disable the current input’s ‘Aux Source Setting’.
Power Management
y
The Power Management feature will turn off the television receiver if no input control command is received from either the Local or IR Key within a
selected hours.
-
Activity on either of these inputs shall reset the ‘Power Management’ timer and prevent interruption of TV viewing.
-
This entry can be set to a value which is corresponding to the desired hours (1Hour to 7Hours).
-
Default value is ‘Off(disabled)’.
Radio Video Blank
(Depending upon model)
-
Set to On(Work) or Off(Do Not Work).
-
Programme that is set to ‘Radio Programme’ and only has Sound should decide whether to set ‘Video Blank’ or not.
-
When ‘Radio Video Blank’ is set to On(Work), ‘Video Blank’ works only in case of Radio Programme.
-
Although set to On(Work), if there are Video signal, ‘Video Blank’ wouldn’t work. In consideration of case that display background screen and
broadcast only with Radio, ‘Video Blank ’works only when there is no Video signal.
-
When set to Off(Do Not Work), ‘Video Blank’ do not work although it is the Radio Programme.
-
This operates only in the Analog TV Mode.
Factory Reset
-
Change all settings to their default values.
