
THERMA V
Monobloc Type
7. Dip Switch Setting
14
Design and installation
■
Outdoor PCB
UN36A Chassis
UN60A Chassis
Dip switch Information
•
Only Dip-switch no.2 and no.3 has a function. Others have no function.
•
When setting the Partial Mode, Mode can be exited to secure capacity after operating for a certain time.
Description
Setting
Default
Low Noise Mode
Always Mode
: Maintain Low noise mode for target temperature
Partial Mode
: Escape Low noise mode for target temperature
Peak Control
Max Mode
Peak Control : To limit maximum current
(Power saving)
OFF is selected
ON is selected
YG
YG
ZG
YG
ZG
ZG
Summary of Contents for THERMAV ZHBW056A1
Page 1: ...Air to Water Heat Pump Monobloc R32 50Hz 5BPM5 01C Replaces 5BPM5 01B P No MFL66101126 ...
Page 2: ...THERMA V Monobloc Type General Information Product Data Design and installation ...
Page 3: ...General Information THERMA V Monobloc Type 1 Model Line Up 2 Nomenclature ...
Page 21: ...3 Dimensions 15 THERMA V Monobloc Type Product Data Backup Heater P No TAY37568301 ...