
8
THERMA V
Monobloc Type
Design and installation
5. Lifting Method
• When carrying the suspended unit, pass the ropes under the unit and use the two suspension points each at the
front and rear.
• Always lift the unit with ropes attached at four points so that impact is not applied to the unit.
• Attach the ropes to the unit at an angle of 40° or less.
• Use only accessories and parts which are of the designated specification when installing.
CAUTION
•
Do not have only one person carry product if it is more than 20 kg.
•
PP bands are used to pack some products. Do not use them as a mean for transportation because they
are dangerous.
•
Do not touch heat exchanger fins with your bare hands. Otherwise you may get a cut in your hands.
•
Tear plastic packaging bag and scrap it so that children cannot play with it. Otherwise plastic packaging
bag may suffocate children to death.
•
When carrying in Outdoor Unit, be sure to support it at four points. Carrying in and lifting with 3-point
support may make Outdoor Unit unstable, resulting in a fall.
•
Place extra cloth or boards in the locations where the casing comes in contact with the sling to prevent
damage.
•
Hoist the unit making sure it is being lifted at its center of gravity.
Summary of Contents for THERMAV ZHBW056A1
Page 1: ...Air to Water Heat Pump Monobloc R32 50Hz 5BPM5 01C Replaces 5BPM5 01B P No MFL66101126 ...
Page 2: ...THERMA V Monobloc Type General Information Product Data Design and installation ...
Page 3: ...General Information THERMA V Monobloc Type 1 Model Line Up 2 Nomenclature ...
Page 21: ...3 Dimensions 15 THERMA V Monobloc Type Product Data Backup Heater P No TAY37568301 ...