LG THERMAV AHNW16606B0 Instruction Manual Download

Page: 7 / 63

Installation Manual

ENGLISH

The manufacturer guarantees that the device is in accordance with current European directives and
standards. The device is marked with the mark CE and it has all the necessary documentation.

We reserve the right to make changes to the manual without prior notice.

As manufacturer we do not take responsibility for the consequences arising from:

• Non-compliance with the manual for the device.

• Incorrect and/or inadequate maintenance of the device.

• Non-compliance with the manual for the installation of the device.

The installer is responsible for installing the device in accordance with the following requirements:

• To thoroughly study the instructions for use and installation accompanying the device before instal-

lation.

• To install the device in accordance with the instructions and national legislation, policies and stan-

dards in force.

For ensuring unobstructed and effective operation of the device the user has to follow the following
instructions:

• To thoroughly study the instructions for use and installation accompanying the device before use.

• To have a qualified and authorized installer perform the installation of the device.

• Ensure regular yearly inspections and maintenance of the device by the authorized maintenance

worker.

• Store this manual in an appropriate dry place close to the device.

Obligations of the user

Obligations of the installer during installation

Obligations of the manufacturer

Important information

1,MFL69676201,영영 2017. 3. 8. 영영 3:06 Page 7

Summary of Contents for THERMAV AHNW16606B0
































































Search results

Summary of Contents for THERMAV AHNW16606B0

Reviews:

Related manuals for THERMAV AHNW16606B0

Brands by name

Popular brands

LG THERMAV AHNW16606B0, Instruction Manual

Search results

Summary of Contents for THERMAV AHNW16606B0

Reviews:

Related manuals for THERMAV AHNW16606B0

Brands by name

Popular brands