37
ENGLISH
PROGRAMMING MODE
14. Time to keep the coin (Use only for coin type)
Entering set up
mode.
You will see lqC1
Button
Display
Press the
High Temp.
button.
Press the
med Temp.
or the
low Temp.
button until
appears in the display.
Press the
Start
button.
Press the
med Temp.
or the
low Temp.
button until
appears in the display.
Press the
Start
button.
Display previous value.
Press
med Temp.(+)
or
low Temp.(-)
button to select time
between
0
~
180
.
Press the
Start
button.
The machine sets up the time to keep the coin, then advances to
the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch
• Card type - Pull the service card
• OPL/Coin type – Press “High Temp.” twice
Time to keep the coin is available only in coin type. (It hasn’t affected on the card type’s time setting)
NOTE
MFL67863709_en_170328.indd 37
2017-03-28 �� 9:54:33
