24
PROGRAMMING MODE
• PrSH (Pre-wash apply or not) is not available in dryer.
NOTE
3-3. Sensor dry apply or not setup (Use only for OPl type)
Entering set up
mode.
You will see lqC1
Button
Display
Press the
High Temp.
button.
Press the
med Temp.
or the
low Temp.
button until
appears in the display.
Press the
Start
button.
Press the
med Temp.
or the
low Temp.
button until
appears in the display.
Press the
Start
button.
Display
.
Press the
med Temp.
or the
low Temp.
button until
appears in the display.
Press the
Start
button.
Press
med Temp.
or
low Temp.
button and then select
or
.
Disable
Enable
One or the other will
display.
Press the
Start
button.
The machine sets up the Vend type, then advances to the next
process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch
• Card type - Pull the service card
• OPL/Coin type – Press “High Temp.” twice
MFL67863709_en_170328.indd 24
2017-03-28 �� 9:54:27
