LG T2518VSAB Owner'S Manual Download Page 38

Page: 38 / 40

Symptoms

Reason

Solution

Water level is too high due to

a faulty water valve.

•

Close the water taps, unplug the washing

machine, and call for service.

The water level sensor is not

working correctly.

•

Close the water taps, unplug the washing

machine, and call for service.

A motor error has occurred.

•

Allow the washing machine to stand for 30

minutes and then restart the cycle. If the error

code is not released, call for service.

Clutch error.

•

Unplug the washing machine and call for

service.

Tub Clean Alarm.

•

Run the

Tub Clean

programme.

Sensor for cloth-sensing is

defective.

•

Manually redistribute the load if articles have

become tangled.

Motor’s revolution is too low.

•

Unplug the washing machine and wait 60

seconds. Reconnect power and try again.

•

Call for service.

Contact-point of Connector is

defective.
CL is not an error. This

prevents children from

changing cycles or operating

the appliance.

•

To deactivate, press and hold the

Beeper

and

Rinse

buttons simultaneously for 3 seconds.

Summary of Contents for T2518VSAB









































Search results

Summary of Contents for T2518VSAB

Reviews:

Related manuals for T2518VSAB

Brands by name

Popular brands

LG T2518VSAB, Owner'S Manual

Search results

Summary of Contents for T2518VSAB

Reviews:

Related manuals for T2518VSAB

Brands by name

Popular brands