LG T-Mobile C1200, User Manual

Page: 87 / 102

C1200 User Guide
88
GPRS settings
GPRS(General Packet Radio Service) is a technology that allows
mobile phones to be used for sending and receiving data over the
mobile network. GPRS is a data bearer that enables wireless
access to data network such as the Internet.
Before you can use GPRS technology
- You need to subscribe to the GPRS service. For availability and
subscription to GPRS service, contact your network operator or
service provider.
- You need to save the GPRS settings for the applications used
over GPRS.
Power on
If you select Power on and you are in a network that supports
GPRS, the phone registers to the GPRS network and sending short
messages will be done via GPRS. Also, starting an active packet
data connection, for example, to send and receive e-mail, is quicker.
When needed
If you select When needed , the phone will use a GPRS connection
only if you start an application or action that needs it. The GPRS
connection is closed after it is no longer required by any application.
Reset settings
You can reset your phone to its default configuration. To do so,
proceed, as follows.
1. Select the Reset settings menu option.
2. Enter the 4-digit security code.
Note
If there is no GPRS coverage and you have chosen Automatic,
the phone will periodically try to establish a connection.
Note
The security code is preset to 0000.
To change this, refer to page 86.
Settings
Menu- -7
Menu- -8
(Menu- -7-1)
(Menu- -7-2)
Settings