Receiving Calls
1) When the phone rings or vibrate (if the Vibrate Mode is
enabled), press any key (except
) or
depending on the Call settings.
• When you press
once, when a call is received,
the phone stops ringing or vibrating depending on
the mode it is in. Press
twice to disconnect.
2) To end an answered call press
.
3) If you are not in the condition to receive call, pressing
Soft key 2 will send a Preset SMS to Caller. The SMS
can be editted using "Edit SMS on Call Reject" function
given under Settings.
Signal Strength
If you’re inside a building, being near a window may give
you better reception. You can see the strength of your
signal by the signal indicator (
) on your phone’s
display screen.
About the antenna
Your phone has a built-in antenna.
As with any other radio
transmitting device, do not touch
the antenna unnecessarily when
the phone is switched on.
Contact with the antenna affects
call quality and may cause the
phone to operate at a higher power level than needed.
Not touching the antenna during a call optimizes the
antenna performance and the talk-time of your phone.
Normal position: Hold the phone as you would any other
telephone.
RD6230
17
RD6230_Eng_OM_1.1.qxd 3/23/06 10:32 AM Page 17
