LG RCT689H, Service Manual

Page: 97 / 165

4-10
DISASSEMBLY AND ASSEMBLY OF DECK MECHANISM
Gear Drive
Washer (W2)
Gear Cam
Plate Slider
Lever Tension
Lever spring
Base Loading
Gear Sector
(B)
(A)
(H10)
(W2)
(L2)
(H11)
Chassis
Gear Cam Hole(C)
Gear Cam Hole(B)
Gear Drive Hole(A)
Brake Assembly Capstan
Lever Brack
Fig. A-7
(Fig. A-7-4)
(Fig. A-7-5)
(Fig. A-7-8)
(Fig. A-7-7)
(Fig. A-7-6)
(Fig. A-7-1)
(Fig. A-7-2)
(Fig. A-7-3)
24. Gear Drive (Fig. A-7-1)/
Gear Cam (Fig. A-7-2)
1) Remove the washer (W2) and then disassemble the gear
drive.
2) Release the hook (H10) of the gear cam and then disas-
semble it upward.
For the assembly, adjust both the gear drive hole (A) and the
gear cam hole (B) straightly and then line up the gear cam
hole (C) to the chassis hole.
25. Gear Sector (Fig. A-7-3)
1) Release the hook (H11) of the gear sector and then lift
the gear sector upward.
26. Brake Assembly Capstan (Fig. A-7-4)
1) Release the locking tab (L2) on the bottom side of the
plate slider and then disassemble it upward.
27. Plate Slider (Fig. A-7-5)
1) Disassemble the plate slider while lifting it up.
28. Lever Tension (Fig. A-7-6)
1) Release the lever tension from the guide (A) of chassis
while turning it counter-clockwise.
2) Disassemble the lever tension while lifting it up.
29. Lever Spring (Fig. A-7-7)
1) Release the (B) part of the lever spring from the guide (A)
of chassis while turning it counter-clockwise.
2) Disassemble the lever tension while lifting it up.
30. Lever Brake (Fig. A-7-8)
1) Disassemble the lever brake while lifting it up.
CAUTIONS