The controls look like this:
Controls
On/Off Timer
Fan/Cool/Dry
• Everytime you push this button, it will toggle between
COOL, FAN, and DRY.
Power
Temperature Setting
• This button can automatically control the temperature
of the room. The temperature can be set within a range of
60
°
F to 86
°
F by 1
°
F.
Select the lower number for lower temperature of the room.
Fan Speed
Energy Saver
The fan stops when the compressor stops cooling.
• Approximately every 3 minutes the fan will turn on and
check the room air to determine if cooling is needed.
Each press of the button cycles through the options in this
order: 1 Hour
→
2 Hours
→
3 Hours
→
4 Hours
→
5 Hours
→
6 Hours
→
7 Hours
→
8 Hours
→
9 Hours
→
10 Hours
→
11 Hours
→
12 Hours
→
CANCEL.
The set temperature will be raised 2
°
F after 30 minutes
and again after another 30 minutes.
Each press of the button cycles through the options in this
order: 1 Hour
→
2 Hours
→
3 Hours
→
4 Hours
→
5 Hours
→
6 Hours
→
7 Hours
→
8 Hours
→
9 Hours
→
10 Hours
→
11 Hours
→
12 Hours
→
CANCEL.
• To turn the unit ON, push the button. To turn the unit OFF,
push the button again.
• This button takes priority over any other buttons.
• When the unit is first powered up, it defaults to settings of
High Cool
at 72
°
F.
• Pressing the Fan Speed button toggles between
Low
and
High
speeds.
- Stopping Operation
- Stopping Operation
Remote Control Operations
Operating Instructions
18
Room Air Conditioner
Summary of Contents for RAD-61A
