35
FUNCTION SETTING
ENGLISH
Low Noise Mode Time
It is the function to set the start and end time of the outdoor unit’s low noise mode operation.
• In the function setting list, select the Low Noise Mode Time category, and press [OK] button to
move to the detail screen.
- After setting the start time and the end time, press [OK] button to move to the upper level
list.
- If the start time and the current time are the same, it enters the outdoor unit low noise
operation mode, and in the monitoring screen, ‘in outdoor unit low noise operation mode’
message is displayed.
- If the end time and the current time are the same, the outdoor unit low noise operation mode
is cleared.
OK
34
FUNCTION SETTING
Function setting
Menu
Description
Low Noise Mode Time
It is the function to set the start and end time of the outdoor unit’s
low noise mode operation.
Wi-Fi Pairing
It is the function to control remotely through network with indoor unit.
Water Temperature
Setting
If you select (Air + Water) as the temperature control mode, This
option is activated on screen. It is the function to set target water
temperature.
3
nd
Party Boiler
It is the function to linkage the boiler of other companies. (this
function can be activated, after setting every value in installer mode.)
CAUTION
!
If the function is not used, please set it to Off.
When you enter the low noise operation, the cooling capacity may be degraded.
NOTE
In case that installed with Multi-V, Low noise mode time setting function can be set only
when the installer setting's outdoor unit function M/S setting is set to "Master" and low noise
mode priority function is set to "RMC".
Low noise mode time setting function is only available in some products.
Summary of Contents for PREMTW101
Page 66: ......
