LG PRARH0, Installation Manual

Page: 14 / 48

14 Auxiliary Heater Relay Kit
5. Installer Setting
Wired Remote Controller - PQRCVSL0/PQRCVSL0QW
Function Code Existing condition
Select existing condition
of each mode by pressing
button.
(00: not installed,
01 : installed)
3
Press button to save. 4
If pressing button long for 3
seconds, it enters into remote
controller setter setup mode.
- If pressing once shortly, it enters
into user setup mode. Please press
more than 3 seconds for sure.
1
If pressing button repeatedly, it moves to
the selected option function code as picture
below.
2
Pressing button will exit settings mode.
❈
After setup, it automatically gets out of
setup mode if there is no button input for
25 seconds.
❈
When exiting without pressing set button,
the manipulated value is not reflected.
5
Function
Aux Heater Relay Kit
Code
25
Setting feature for indoor unit when Auxiliary Heater Relay Kit is newly installed, or installed unit is removed.
Installer setting mode is to set the detail function of the remote controller.
If the installer setting mode is not set correctly, it can cause problems to the product, user
injury or property damage. This must be set by an certificated installer, and any installation
or change that is carried out by a non-certificated person should be responsible for the
results. In this case, free service cannot be provided.
CAUTION
5. Installer Setting