133
INFORMATION
Before Reporting a Problem, Check the
Following:
If the following symptoms occur, please carry out the checks and
adjustments described below. There may be no malfunction.
General
Problem
Solution
Cannot view certain
programs.
•
Adjust the location or orientation of the
antenna.
•
Save the programs you wish to view
later using
Auto Tuning
or
Channel
Edit
.
There is a delay after the
projector is switched on
before the image is fully
visible.
•
This is not a problem. Image noise that
may occur when the projector is first
switched is being cleaned up.
Picture
(Home)
→
SETTINGS
→
SUPPORT
→
Picture Test
First run a Picture Test to verify that the image signal output is normal.
If there is no problem with the test image, check external device
connections and broadcast signals.
Problem
Solution
Images from previous
program or other
programs linger or
the screen displays
annoying lines.
•
Adjust the orientation of the antenna
to the TV transmitter, or refer to the
manual for instructions on connecting
the antenna.
Vibrating horizontal/
vertical lines and
fishnet patterns appear
momentarily.
•
Such a problem may happen when
there is strong electronic interference.
Turn off other electronic devices such as
mobile phones, power tools, and other
small electrical appliances.
