LG PEXPMB100, Installation Manual

Page: 8 / 10

8
ACU IO INSTALLATION
ENGLISH
RST_2
RST_1
CN_UART
12VDC
CH1
UI1 UI2 UI3 UI4
G G
A+ B-
+ -
RS485
CH2
AO1 AO2
G G
DO1 DO2
A+ B-
RS485 DIGITAL OUPUT ANALOG OUTPUT
UNIVERSAL INPUT
ON
SW01
LDO1 LDO2
1 2 3 4 1 2 3 4
SW02
ON
LDO3 LDO4 LDO5 LDO6
RST_2
RST_1
CN_UART
12VDC
CH1
AO1 AO2 AO3 AO4
G G
A+ B-
+ -
RS485
DO1 DO2 DO3 DO4 DO5 DO6 COM COM
DIGITAL OUTPUT UNIVERSAL INPUT
ANALOG OUTPUT
ON
SW01
LDO1 LDO2
1 2 3 4 1 2 3 4
SW02
ON
LDO3 LDO4 LDO5 LDO6
RST_2
RST_1
CN_UART
12VDC
CH1
+12V
DCOM
DI1 DI2
GND
DI3
A+ B-
+ -
RS485
UI1 UI2 UI3 UI4 UI5 UI6
G G G G
DIGITAL INPUT
ON
SW01
LDO1 LDO2
1 2 3 4 1 2 3 4
SW02
ON
LDO3 LDO4 LDO5 LDO6
NOTE
!
• The Power and communication line needs to match the polarities. If it is incorrect, it will not
work.
• Turn power off before wiring. and then power it on after wiring.
• Be careful because static electricity can cause product damage
during installation.
• For the wired Power wire, Communication wire and Signal wire,
remove the coating at the end of the wire to connect and than use
the pin type (JOBN153) to connect to the terminal block
• All field supplied parts and materials and electric works must be
conform to local codes.
• Use copper wire only.
• All wiring must be performed by an authorized electrician.
Pin type (JOBN153)
Wiring
PEXPMB300 (ACU.UIO) PEXPMB200 (ACU.UO) PEXPMB100 (ACU.UI)
DC 12 V
+ -
Not
used
#1
Analog
Output
Digital Output
(ON/OFF)
Digital Output
(ON/OFF)
Universal Input
(Analog / Digital)
From
Master Unit
Universal Input
(Analog / Digital)
#1
#2
Bus-A Bus-B
DC 12 V
+ -
From
Master Unit
Analog Output
Bus-A Bus-B
DC 12 V
+ -
From
Master Unit
Digital Input
Bus-A Bus-B
#3
#4
#1
#2
#3 G #1 #2 #3
#4
#2 #1 #2 #1 #2 #3
#4
#5 #6 #5
#6
#1
#2
#3
#4