background image

4

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

• Do not touch the board when the power is connected. It can

cause a fire, electric shock, explosion, injury and problem to the
product.

• Unplug the unit if strange sounds, smell, or smoke comes from

it. Otherwise, it may cause electrical shock or a fire.

• The appliance must only be supplied at safety extra low voltage

corresponding to the marking on the appliance.

CAUTION

In-use

• Do not clean using the powerful detergent like solvent but use

soft cloths. It will cause fire or product deformation.

• Do not press the screen using powerful pressure or select two

buttons. It will cause product breakdown or malfunction.

• Do not touch or pull the lead wire with wet hands. It will cause

product breakdown or electric shock.

• This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.

• This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.

!

Summary of Contents for PEXPMB100











Reviews: