LG N4B2 User Manual Download Page 186

Page: 186 / 203

Problem solutions

Removing the HDD with the error and connecting a new hard drive (e.g. HDD 4) will

display the new hard disk status to be free on the system/volume/add or remove HDD

page. Select the hard disk and click the Add button and RAID will reconfigure. This will

delete all contents of the new hard disk.

RAID reconstruction entails to RAID 1 only.

If there is another failure during reconfiguration, another hard disk should be connected

in place of the hard disk at work and reconfigure RAID.

When connecting or disconnecting the HDD, strictly adhere to the following procedure

and avoids abnormal system operation or data obstruction.
1. In the LG Network Storage, one HDD can be connected or disconnected at a time.

2. 10 seconds will lapse before 2 tones are heard when the LG Network Storage is

connected to or disconnected from a new hard drive. Next, connect or disconnect the

HDD.

8. RAID configuration error checkup

Summary of Contents for N4B2












































































































































































































Search results

Summary of Contents for N4B2

Reviews:

Related manuals for N4B2

Brands by name

Popular brands

LG N4B2, User Manual

Search results

Summary of Contents for N4B2

Reviews:

Related manuals for N4B2

Brands by name

Popular brands