LG N4B2 User Manual Download Page 55

Page: 55 / 203

4. LG Network Storage Web Menu Use (for LG

Network Storage administrators)

Volume Array Configuration

This page displays information pertaining to existing state and size of the volume of the LG

NETWORK STORAGE. Configuration is possible through the volume name, configuration

disk, RAID level, volume state and capacity.

Name

The name will be divided into a maximum of 4, i.e. volume1/ volume 2/ volume 3/

volume 4. The check box on the left refers to the volume.

Disk

The volume configuration will be divided into various hard disk locations and will be

labeled B1/B2/B3/B4. The configured volume via RAID will appear on a multitude of

disks.

RAID

RAID level is shown as NONE, JBOD, RAID0, RAID1, RAID5 and RAID10. It is possible to

have None with one hard disk, JBOD / RAID0 / RAID1 with 2 hard disks, JBOD / RAID0 /

RAID5 with 3 hard disks, and JBOD / RAID0 / RAID5 / RAID10 with 4 hard disks.

Status

This indicates the normal state and operation of volume. The state of volume can

be active / none / degraded / destroyed / formatting / syncing / migrating / quarter-

check / scanning / sys_syncing.

- ‘active’ refers to no abnormality in the volume,

- ‘none’ refers to when no RAID is configured,

- ‘degraded’ refers to configuration of the abnormal or deleted hard disk process,

though volume is available for use,

- ‘destroyed’ refers to configuration of the abnormal or deleted hard disk process, and

volume is unavailable for use,

- ‘formatting’ refers to the process of formatting the volume,

Summary of Contents for N4B2












































































































































































































Search results

Summary of Contents for N4B2

Reviews:

Related manuals for N4B2

Brands by name

Popular brands

LG N4B2, User Manual

Search results

Summary of Contents for N4B2

Reviews:

Related manuals for N4B2

Brands by name

Popular brands