36
ENG
English
Using PCoIP solution
y
Enable VMware View
The Enable VMware View option allows the user to
configure the portal to use the VMware View Con-
nection Server.
y
Identify Connection server by
The Identify Connection Server by selector allows
the administrator to decide whether to identify the
connection manager by IP address or by FQDN. If
VMware View is disabled, this field is not required
cannot be edited.
y
Port
The Port parameter allows the administrator to
specify the port to communicate with the VMware
View Connection Server.
y
ssl
The SSL parameter allows the administrator to
specify the SSL to communicate with the VMware
View Connection Server.
y
auto Connect
The Auto Connect parameter allows the adminis-
trator to ensure that the device always automati-
cally connects to the VMware View Connection
Server when starting the portal.
y
Event log
y
session statistics
y
PCoIP Processor
y
Ping
Each tab has the Close button to close the window.
Figure 2-15. Display Configuration
Figure 2-16. VMware View Configuration
Display Tab
The Display tab allows the user to configure the
EDID function of the monitor.
Diagnostics Window
In the Diagnostics window, the administrator can
access the window tab to diagnose the portal. The
Diagnostics window has the following tabs:
VMware View Tab
The VMware View tab allows the user to select the
device to use the VMware View Connection Server.
y
The Enable display override function can be
used when the EDID function of the monitor
is not running.
y
The VMware View parameters can also be
configured using the Webpage Administra-
tion Interface.
y
To enable the VMware View function, the
Enable Connection Management check box
in the Enable Connection Management Tab
must be deselected.
noTE
noTE
noTE
