19
ENG
English
CUsToMIZInG sETTInGs
MEnU settings
Picture
1
Press any button on the front of the monitor to dis-
play the
MonIToR sETUP
OSD menu.
2
Press the
MEnU
button to display the options in the
OSD menu.
3
Set the options by pressing the buttons on the front
of the monitor.
4
Select
EXIT
to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
Each option is explained below.
Menu
analog
(D-sUb)
PCoIP
Description
bRIGHTnEss
●
●
Sets the brightness of the screen.
ConTRasT
●
●
Sets the contrast of the screen.
sHaRPnEss
●
●
Sets the sharpness of the screen.
y
If the screen is not displayed properly after adjusting the settings, use the "FACTORY RESET"
option to revert back to the factory default settings. If necessary, enable the "WHITE BALANCE"
option again. This option is enabled only for analog (D-SUB) signals.
y
analog: D-sUb (analog signal) input.
PCoIP
: Internal signal through the lan.
noTE
